Plants


Main Picture Description View
Main Picture 2,000 TPD Complete Plant with New & Reconditioned Equipment

- Marcy 5' x 8' Refurbished Ball Mill, reconditioned 75HP motor
- KVS 6'x 15' Refurbished Ball Mill, Reconditioned Westinghouse 200HP Type LAC induction motor
- Allis Chalmers 6' x 15' Refurbished Ball Mill, Reconditioned Westinghouse 200HP Type LAC induction motors
- 7' x 10' Allis Chalmers Refurbished Ball Mill, reconditioned 250HP Fairbanks Morse Motor
- 13' x 19.5' Refurbished Koppers Ball Mill, reconditioned 1500 HP Synchronous motor

- New FL Smidth Dorr Oliver Eimco Flotation Cells.
- 26 Model 144
- 18 Model 100r
- 16 Model 50r

Much More..		 View
Main Picture Mineral Processing Plant - Consisting of: 1 Approx. 24” Jig - -1-Approx. 42” Jig - Spirals- (not on trailer) – 2 Chain Mills (Shop Made) – 1 Cyclone – Misc Bins & Sumps- Motors to drive units – 2 Galigher 2.5x2 Pumps – Interconnecting hoses.

Also available: Crusher - w/Oscillating Feed Hopper – 10x16 Jaw Crusher
Size / Model: 10x16 Jaw Crusher		 View
Main Picture 150TPD (15tph) Dense Media Separation (HMS) plant.

Can be used for diamond recovery or nickel pre-concentration.		 View
Main Picture 40 TPH WET SCREENING AND GRAVITY RECOVERY PLANT - SOLD

New in 2008 – only treated 2000 tonnes of material

Modular Plant (Plug and Play) complete with the following :
1. 5.5 cu. yd hopper and tilting stationary grizzly
2. 18-in. x 8-ft. long Simplicity Pan Feeder
3. 20-in. x 35-ft. Feed Conveyor
4. Simplicity – 4-ft. x 8-ft. Double Deck Wet Screen
5. Screen skid, frame, and sump
6. Allis Chalmers 3 x 3 SRL Pump
7. Falcon SB 750 Centrifugal Batch Gravity Concentrator
8. Auto Pac system for Falcon
9. Sluice Recovery System
10. Berkeley 4 x 3 Water Pump
11. MCC Electrical Panel and wiring
12. Water Distribution System with all piping and valving
13. Goldtron Concentrating Table
14. 20-ft. Standard storage sea container
15. All manuals, drawing, schematics, spare parts

System can be shipped on (2) flat bed road trailers
System is available for immediate sale

Presently located in Mexico		 View
Main Picture 1,300 TPD Complete Processing Plant. -SOLD-

This complete processing plant operated at near capacity from 1994 until 2005. At plant shutdown, the 3 mills were dismantled, inspected, sandblasted, and painted in preparation for export.

- 12' x 18' Krupp Ball Mill, 1000 kw
- 10' x 14' Krupp Rod Mill, 450 kw
- 6' x 20' Krupp Regrind Mill, 250 kw
- (2) Hoesch Hoesch filter presses, Model# 44 1416/12 - VLB - M60PP/GI
- Krupp Jaw Crusher, 36" x 48", 150 MM adjustable, 110 kw / 400V, 50 Hz
- Bergeaud Cone Crusher, 4.25' standard head, 23mm adjustable, 132kW, 400V, 50 Hz		 View
Main Picture 45,000 - 70,000 TPD New/Unused Process Plant.

• (1) 60” x 89” Gyratory Crusher
• (1) 38’ x 24.8’ Sag Mill
• (2) 22’ x 36.5’ Ball Mills
• (2) HP 500 Cone Crushers
• (2) VTM 1250 WB Vertimills
• (6) 40HP Apron Feeders
• (1) 200HP Apron Feeder
• (1) 30HP Apron Feeder
• (1) 26,000HP Wrap Around Motor
• (4) Quadramatic Drives (2 x Mill = 12,500HP)
• (3) Main Power Transformers
• (1) 5TPD Incinerator
• (1) Full Water Treatment Plant
• (1) Full Sewage Treatment Plant
• (9) Motor Control Centers		 View
Main Picture 17,000 - 19,000 TPD Gold, Copper Complete Plant.

- All Equipment still in place on foundations.
- Equipment in excellent condition.
- Open pit mobile fleet also available.
- Major Mineral Processing Equipment includes:
- 30' x 13' Sag Mill
- 18' x 28'6" Ball Mill
- 16'6 x 25'6" Ball Mill
- 10'6" x 12' Ball Mill
- 54-74 Gyratory Crusher
- HP800 & HP700 Cone Crushers
- Complete equipment list sent upon request		 View
Main Picture 3,400 to 3,600 TPD Cement Plant.

Complete cement plant, rated for 1.2 millon tons/year (3,400 to 3,600 tons/day), still in operation. Plant includes raw mill system including (6) ball mills rated for 52 tph each, (5) rotary kilns rated for 20 tph each, finish mill system with ball mills rated for up to 27 tph each and power plant rated for 25 mw generating capacity. Plant includes FL. Smidth, Allis Chalmers & Marcy ball mills; FL Smidth & Allis Chalmers rotary kilns; Raymond bowl mills; Sturtevant air separators, etc		 View
Main Picture 500 TPD CIL Plant.

Built in 2000/01 and operated by them until July 2004.

The front end (ball mills) have a capacity of 500 tpd but the CIL tanks (10) can handle 2000 tpd.		 View
Main Picture 500 to 700 TPD Gold Mill CIL Plant

Buildings Not Included
All Plant Equipment Is Included
Equipment Match-Marked, Dismantled, Packaged

Includes:
-18" x 32 Telsmith Jaw Crusher
-3' Symons Cone Crusher
-9'x12' Hardinge Ball Mill
-7'x5' Hardinge Regrind Mill
-Much More; complete list on request		 View
Main Picture 2,900 TPD Complete Zinc Copper Plant.

Conventional grinding and flotation to produce separate zinc and copper concentrates.The primary crushing took place underground utilizing a jaw crusher, which reduced the material to minus 100-millimetre particle size. Primary grinding was done in a SAG mill operating in open circuit. Classification of the SAG mill discharge and flash cell tailings was by cyclones with the underflow feeding two ball mills in parallel. The ball mill discharges were combined and pumped to a flash flotation cell, while the cyclone overflow reports to the third stage of grinding to produce a final ground product of 80% passing 36 microns. Copper flotation commenced in a flash flotation cell that recovered 45% of the total copper at a grade of 14 to 18% copper with 40 grams of gold per tonne. The flash flotation cell maximizedthe overall gold recovery and produced a final copper concentrate grade. The flash flotation cell tailings were returned to the primary cyclone feed. The ground product of the third ball mill circuit was pump to a conventional copper rougher and cleaner circuit (four stages) to recover and upgrade the remaining recoverable copper mineral in he mill feed. All copper flotation was done in an alkaline circuit. The copper first stage cleaner tailings and copper rougher tailings were combined to form the zinc circuit feed. The zinc circuit used conventional flotation cells to float a zinc rougher concentrate,which was upgraded in three stages of cleaning. Zinc flotation was done in a more alkaline circuit than the copper circuit. The zinc rougher tailings and zinc first cleaner tailings were pumped to the paste backfill plant. Copper and zinc concentrates were pumped to their respective high capacity thickeners followed by filtering in pressure filters to obtain the final moisture content in the respective concentrates that were less than their transportable moisture limits. An Outokumpu Courier 30 on-stream analyzer continually analyzed 17 streams for copper, zinc and iron mineral slurry. An Autometrics Multipoint PS-400 (particle size monitor) was installed to monitor the grinding circuit operation.		 View
Main Picture 3,500 TPD CIP Gold Mill.

The mill contains the entire flowchart from the 20” grizzly and hydraulic rock breaker to the fully-equipped gold room (with the exception of the cone crusher that was sold right after the mill shut down).		 View
Main Picture 2,000 TPD Merrill Crowe Gold Mill.

- 2 of the 3 filters were used at a time with the filtrate going to a hopper clarifier. The clarified solution reported to a tank & was pumped to US clarifiers & to the Crowe tower & precip circuit.
- The gold recovery was ~ 99.5% after washing
- The plant treated the Oxide circuit only for autoclave discharge. The product was very fine & viscous hence a low tonnage of 40 to 50 tpd/filter x 2 filters = 80 to 100 tpd, or approximately 4 tph.
- The particle size was estimated at ~ 80% passing 40 microns.
- The feed % solids was 50 +/- 5 % & discharge was ~ 72 +/- 5%
- The cake reported to the CIP plant & subsequently to tails
- The system was shutdown after converting a pair of leach tanks to CIL tanks & having all carbon strip solution report to a new EW circuit.
- Typical maintenance on filter clothes, agitators & repulpers.
- Equipment List available upon request.		 View
 
Display Num