| Main Picture |
Type |
Description |
Diameter (feet) |
Length (feet) |
Horse Power |
View |
| | | | | | |
 |
Ball |
600mm x 900mm (2'x3')SALA SRR Ball Mill c/w feed chute, dicharge trommel, discharge chute, replaceable rubber liners, existing ball charge, 3 Hp motor/gear reducer drive, modular steel frame and full gaurding. |
2 |
3 |
3 |
View |
 |
Ball |
Denver 3’ x 5’ ball mill.
- complete with 25hp, 870 rpm, 3ph, 60hz, 220/440v, electric motor
- gear reducer, pinion and two piece ring gear
- accessories include air/electric auto lubrication system with barrel
pump, feed and discharge chutes.
- Liners appear to be in good condition
- Unit is mounted on I-beam frame
- No ball charge or electric starter. |
3 |
5 |
25 |
View |
 |
Ball |
3' x 5' Hardinge Refurbished Ball Mill.
- Includes Ni Hard Steel Liners (Majority of Life Remaining)
- 50 HP, 1770 RPM, 45.5 Amps. 550 Volt, 3 Phase, 60 Hz Motor
- Mill is driven through 50 HP Electric Motor to Pinion and Gear Reducer
- Shell Speed: 26 RPM
- All Mounted on Rigid, Steel Reinforced Frames
- Glycol Cooling (Oil Lubricating) System c/w Reservoir and Radiator |
3 |
5 |
50 |
View |
 |
Ball |
3' x 8' Kennedy Van Saun skid mounted ball mill, 90% liners, no motor |
3 |
8 |
0 |
View |
|
Ball |
4' x 6' 30 HP. Mfg unkown, skid mounted, runs on rubber tires, rubber liners |
4 |
6 |
30 |
View |
 |
Ball |
Denver 4' x 6' Ball Mill.
- Complete with 50 hp motor through v-belt drive.
- Chute feed and trunnion overflow discharge
- 17 tooth pinion, 5' diameter drive sheave
- 100 tooth bull gear 8" wide.
- Capacity 3 to 4 tons per hour at 200 mesh.
- Shipping weight 25,000 pounds |
4 |
6 |
50 |
View |
 |
Ball |
Denver 4' x 8' S/N U8940-3, 50 HP, 575 Volt, 1750 RPM, TEFC Motor, Falk Gear Drive, Date 12/73 Ratio 9.272 |
4 |
8 |
50 |
View |
 |
Ball |
4' x 8' Denver Ball Mill
- Skid mounted.
- Very good condition, no signs of external shell or head damage.
- No Motor - Drive Motor Formerly: Westinghouse Lifeline T 50 HP, Model TCFC, 880 RPM, 460 Volts, 67 Amps, 3 ph, 60 Hz. S/N 8306. (Available but Needs Rewinding) |
4 |
8 |
0 |
View |
|
Ball |
Marcy 5' x 8' Refurbished Ball Mill.
c/w bolt on heads, cylindrical shell, 2 manholes with covers, Babbitt trunnion
bearings, spur girth gear, spur gear pinion with Babbitt bearings,
reducer, 75 HP 3/60/575V Electric Motor, and new rubber liners. |
5 |
8 |
75 |
View |
|
Ball |
(2) 5' x 10' NEW Ball Mills.
- Chinese mfg
- Complete ready to ship |
5 |
10 |
200 |
View |
|
Ball |
Marcy 5' x 14' Ball Mill. |
5 |
14 |
0 |
View |
 |
Sag |
6' x 3' Allis Chalmers Sag Mill.
- Siemens-Allis 40 HP drive motor, 1765 RPM, Type RGZ, 97.2/48.6 Amps, 3 ph, 60 Hz, 230/460 Volts.
- Falk gear reducer, Model 401-7E22-06A, 82 RPM, 21.35:1 ratio, 40 hp. Class 1. |
6 |
3 |
40 |
View |
 |
Ball |
Marcy 6’ x 6’ Ball Mill.
- spout feed, trunion overflow
- c/w rubber liners (removed)
- 100 HP, 3/60/1770 motor
- mounted on structural steel frame
- very good condition |
6 |
6 |
100 |
View |
 |
Ball |
Hardinge 6' x 8' Ball Mill.
- No motor
- Serial number R338
- Trommel feed
- Still in place, on foundations |
6 |
8 |
0 |
View |
 |
Ball |
Dominion 6' x 10' Ball Mill.
- rubber lining
- no motor, reducer or pinion
- s/n 340-50 |
6 |
10 |
0 |
View |
 |
Ball |
Allis Chalmers 6' x 10' Ball Mill.
-herringbone gear
-250hp
-Hamilton gear box H-1112 3.866:1 service factor 2.05 Rated for 250hp
-removed, ready for shipment |
6 |
10 |
0 |
View |
 |
Rod |
6' x 12' Hardinge Rod Mill.
- 200hp with reducer and drive.
- 3 phase, 60hz, 460VAC.
- Trunnion overflow, bolted heads, cut spur gearing.
- Liners (steel)appear to be very good.
- Feed and discharge openings 16".
- Approx overall length 19'.
- Weight 50 000lbs. |
6 |
12 |
200 |
View |
 |
Ball |
- SOLD - 6' x 12' Marcy Ball Mill - SOLD -
-two piece riveted shell
-new rubber liners
-bull gear and pinion gears are reported to be in very good condition
-no drive motor included |
6 |
12 |
0 |
View |
 |
Ball |
Allis Chalmers 6’ x 14’ Rebuilt Ball Mill.
- Spout Feed, New Overflow Discharge
INCLUDING:
- Welded Steel Shell
- Cast Steel Feed & Discharge Heads
- Existing Rubber Liners Removed and Stored On Pallets with Fastenings
- 300 HP, 1180 RPM, 4160 Volt Motor c/w Drive Sheave & 8 Grooves Pulley,
OR
- 250 HP Motor, 575 Volts c/w Gear Reducer Drive
- Pinion Shaft Assembly with Driven Sheave with Belt Guard & Sole Plates
- Double Helical Gear with Gear Guard
- Discharge Trommel
- Main Bearings with New Babbitt Inserts and Sole Plates |
6 |
14 |
300 |
View |
 |
Ball |
(1) KVS 6'x 12' Refurbished Ball Mill
- Reconditioned Westinghouse 200HP Type LAC induction motors
- Two piece helical gear
- Air Clutch: Easton Yale 16VC600 |
6 |
15 |
200 |
View |
|
Ball |
6' x 16' Ball Mill. |
6 |
16 |
0 |
View |
